24 Hour Emergency Plumbing & Septic Services
4.8 / 5 Ratings based on 584 reviews Great Plumbers, Great Reviews
Get $25 OFF This Sunday
404-629-9478
Are you also a victim of the following scenario? You’re taking a shower, and suddenly the water turns cold, and no matter what you do, it doesn’t get any warmer. It’s a really bothersome situation, and this problem can come up in multiple ways and multiple times throughout the day and really affect your daily life. If you are in this scenario right now, don't panic. Just like every other plumbing problem, there’s also an explanation for this one, and in this article, we’ll go over some of the common reasons why you might be experiencing this.
The first place you should investigate is your hot water heater. If there’s a gas line leak, this would leave your water heater unfunctional and, of course, is a major hazard. First, inspect the connections in your water heater for potential leaks, and if you smell something odd inside your home, such as a rotten egg smell, there’s a strong chance that you’re dealing with a gas leak. Since this situation can be extremely dangerous, first, close the gas valves and do not do anything about the appliances inside your house, including turning them off. Move to a safe distance with the household members and alert the utility provider as well as the fire department. Absolutely don’t try to repair the leak by yourself; you can seriously get harmed. Always leave these types of plumbing services to the professionals.
To heat water, your electric hot water system uses a lot of heating elements that are made up of a coil, ribbon, and strop of wire. Thanks to these, the heat that will be transferred later is produced. However, when one of these elements no longer works efficiently due to a lack of power, you will be unable to provide a continuous hot water supply. In this case, you may want to contact professionals for water heater repair.
If you have a gas water heater, normally you should always see a pilot light located behind an access panel at the bottom. A pilot light ignites the gas required to heat your water heater. If you’re not receiving hot water, you should make sure that the pilot light is lit. If not, re-light the pilot light.
Sediment can build up at the bottom of the water heater tank over time. As a result of this, a blockage between the heating element and the water can occur, and you will see the result of this as no hot water.
A gas control valve is crucial when it comes to supplying hot water, so if the control valve fails, you will not receive any hot water. Gas lines will be connected to the gas control valve. If you’ve already checked the pilor light and there’s no issue with that but you still don’t have hot water inside the house, a gas control valve might be the problem.
If the tank is not large enough to accommodate your household's hot water requirements, you may run out of hot water. If this is the case, you may want to consider a water heater replacement in Dallas, GA. You can either consider getting a larger tank or a tankless water heater.
A water heater's thermostat should be set between 122 and 140 degrees Fahrenheit to produce warm water. If there is no hot water but everything else seems to be in working order, make sure to check up the thermostat.
Some household repairs may be accomplished without the assistance of a professional; services that concern water heaters aren’t in this category. Only qualified plumbers should try to fix and replace it. If you’re looking for a reliable water heater installation, you’re in the right place. At New Era Plumbing & Septic, we can quickly solve any type of water heater problem and assist you with any other plumbing difficulties you may be experiencing. Call us now to discover more about us.
The tap water that most homeowners use today contains minerals that harden…
Are you also a victim of the following scenario? You’re taking a…
A septic tank is an essential part of your home's wastewater management…